1.Regular Cleaning and Maintenance:
Thoroughly clean the industrial floor scrubber after each use, including removing residual dirt, grime, and debris from the ground as well as cleaning the brush plate and suction pipelines to ensure all parts of the equipment are clean and free of contamination.
Clean the dirty water tank regularly, as stagnant water in the tank can emit unpleasant odors and even affect the performance of the equipment.
Regularly check the cleanliness of the squeegee, and if it has many adhered substances, use running water to clean the squeegee rubber strip and suction inlet.
Clean the suction hose connected to the squeegee to avoid local blockages that may affect its suction effect.
2.Proper Operation:
Follow the correct operating procedures when using the industrial floor scrubber, avoiding overuse, overload, collisions, and drops.
Avoid using the scrubber on unsuitable ground surfaces, such as excessively wet or excessively hot environments.
Protect the various components of the equipment to avoid wear and damage.
3.Use Appropriate Cleaners:
Choose cleaners suitable for the industrial floor scrubber, avoiding overly strong chemicals that may corrode and damage the equipment.
When using cleaners, follow the instructions for dilution and use to avoid overuse.
4.Regularly Replace Wear Parts:
Wear parts of industrial floor scrubbers include brush plates, squeegee rubber strips, filters, and suction nozzles. These wear parts will wear and age over time, affecting cleaning effectiveness and equipment life.
Regularly inspect and replace wear parts to ensure the normal operation of the equipment. For example, brush plates and squeegee rubber strips usually need to be replaced regularly based on usage frequency and ground conditions.
5.Storage and Preservation:
When the industrial floor scrubber is not needed temporarily, it should be properly stored and preserved. Place it in a dry, ventilated area, avoiding direct sunlight and damp environments.
Regularly check the equipment’s wires and plugs to ensure they are safe and reliable.
For battery-powered scrubbers, it is recommended to unplug the battery after fully charging to avoid prolonged charging that may affect battery life.
6.Regular Inspection and Repairs:
In addition to daily maintenance and cleaning, regularly perform a comprehensive inspection of the industrial floor scrubber, including motors, circuits, transmission components, etc., to ensure the equipment is in good working condition.
If any abnormalities or malfunctions are found, prompt repairs and replacements should be carried out to avoid problem deterioration leading to equipment damage.
By following these measures, the service life of an industrial floor scrubber can be effectively extended, improving its work efficiency and cleaning effectiveness. Typically, depending on usage frequency, operating environment, and maintenance conditions, the service life of a floor scrubber is around 3 to 5 years. However, proper use and maintenance can further extend its service life.