The daily maintenance of a floor sweeper is crucial to keep it operating efficiently and prolong its lifespan. Here are some clear and point-by-point suggestions for the daily maintenance of a floor sweeper:
I. Keep the Machine Clean
Clean the Roller Brush:
The roller brush is one of the core components of a floor sweeper, and it needs to be cleaned regularly to ensure its normal function and extend its service life.
Remove the roller brush, rinse the bristles under running water, use a brush and cleaner to remove stains and hair, and then allow it to dry.
Clean the roller brush at least once a week to maintain its cleaning effect.
Replace the Filter:
The filter is used to filter large particles in the air, preventing dust and debris from entering the interior of the floor sweeper.
Regularly check if the filter is dirty and replace it with a new one if necessary.
Clean the Bin:
The bin of the floor sweeper is used to collect dust and trash from the ground.
After each use, empty the bin promptly and check if there are any leftover particles, avoiding them from spilling on the ground.
II. Check the Machine’s Performance
Battery Life:
The battery is the power source of the floor sweeper, and paying attention to its lifespan is an essential part of daily maintenance.
Regularly check the battery’s usage condition and consider replacing it if necessary based on its usage frequency and age.
Cleaning Effect:
Regularly check the cleaning effect of the floor sweeper to ensure its normal operation.
If the cleaning effect is poor, promptly investigate the cause and make adjustments or repairs.
Fault Reporting:
If the floor sweeper encounters any faults or abnormalities, check the fault report promptly to understand the cause.
Troubleshoot the issue based on the fault report. If unable to resolve, contact the after-sales service personnel for assistance.
III. Avoid Machine Wear and Tear
Avoid Collisions:
When using the floor sweeper, pay attention to avoid collisions with obstacles to reduce the risk of damage to the machine.
Check the surrounding environment before use to ensure sufficient operating space for the machine.
Avoid Long-Term Operation:
Long-term operation can increase the wear and tear of the floor sweeper, increasing the risk of damage.
Arrange the working time of the floor sweeper reasonably based on actual needs to avoid overuse.
Regular Maintenance:
Perform regular maintenance on the floor sweeper, such as checking for worn-out wires, lubricating parts, etc.
Follow the manufacturer’s maintenance guidelines to ensure the floor sweeper is in its best working condition.
IV. Other Considerations
Use Dedicated Cleaners:
When cleaning the floor sweeper, use dedicated cleaners and avoid using cleaners with strong corrosive properties to prevent damaging the machine’s surface and internal parts.
Storage Environment:
Store the floor sweeper in a dry, ventilated place, avoiding direct sunlight and damp environments.
Before storage, ensure that the floor sweeper is completely dry and all power sources are turned off.
By following these daily maintenance suggestions, you can ensure that your floor sweeper remains efficient and extends its service life.